Surface Treatment
We can provide different kinds of stainless steel surface treatments such as
No8
No.8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. Normally No8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.
No4
No.4 Brushed finished is a unidirectional finish obtained with 150/180/240/320 grit abrasive, higher grit numbers gave finer grinding lines. It is ideal for kitchen appliances, work surfaces, hand rails and more.
Polishing
Polishing is a metal process that involves removing the oxidation and improving the quality of the metal by adding protection or removing certain defects.
Polishing uses coarse to medium abrasives to remove moderate amounts of metal from the surface. The process removes scratches and minor surface imperfections which are too deep for buffing to fix. The final metal piece will have a brushed look without any reflections.
Hairline
Hairline was obtained by endless grinding lines extend uniformly along with the length of coil or sheet. It’s a well-defined directional finish with long and fine line. It’s widely used in elevator panels, escalators, automotive sector, interior cladding, building facades and other architectural applications.
PVD coating/colored
PVD coating is one of the best methods for enhancing thin film plating elements. The vacuum deposition method coats the product with a film of 0.1-0.3 microns thick. It do not dis color or tarnish and do not suffer under UV radiation easily. It widely used for architectural wall panels, coping and trim, etc.
Embossed
The Stainless Steel Embossed Sheet made with high type, various shadings and subtleties at the genuine expense. Decorated treated steel sheets are commonly used for outside and within the structure and moreover for lift/lift.
Etching
Etched patterns are created by selectively applying a protective acid resistant film to appointed areas and acid etching the unprotected areas. The etching removes a thin layer of stainless steel, changes the color to a dull silver-gray, and roughens the surface which can be contrasted with grinding, super mirror or other finishes to create thousands of variations. Etched finished also can be colored before or after etching. It was widely used for decoration applications.
Stamped
The Stainless Steel stamped Sheet made with high type, various shadings and subtleties at the genuine expense. Decorated treated steel sheets are commonly used for outside and within the structure and moreover for lift/lift.
